Wood-frame buildings, residential and commercial

Masonry buildings

Log homes in various B.C. locations

"Green" garage roof

Petro-Canada Station, 22nd. & Marine, West Vancouver (1998) Design engineer for new masonry-block service building, including engineered lintels, glulam beams and reinforced-concrete retaining walls and foundation.

Maple Ridge "Motor Sports" Building, Maple Ridge (1998) Design engineer for masonry-block wall addition to existing building on Lougheed Hwy. in Maple Ridge, including foundations.

"Triple Tree Nursery" Masonry wall, Maple Ridge (1995) Design engineer for new greenhouse canopy masonry block wall support. Special L-shaped footing design was required to accommodate very tight property line location.

Modular homes and mobile trailers in B.C. and Washington

SIP (Structural Insulated Panel) buildings in BC and Alberta

Pre-fabricated Steel and Quonset sheds to BC code.

Specialty product, Kallwall translucent wall panels to BC code

Condition survey of fire-damaged residences

Remedial design of existing residential and commercial buildings to BC Code

Design review of loading of solar panels onto existing roof

Frame-in elevator installation into existing residence

Design review of existing greenhouses

Design of a rancher into a two-storey residence

Foundation design for propane storage tank

Review of modified Bridge Launching Truss (increase span from 125 to 150 feet)

Review of various industrial sludge settling tanks

Structural review of weighbin tank modifications

Retrofit and design of new steel superstructure of 15'w x 72' long skewed bridge over salmon creek

Design of 12'w x 42' long single span I girder bridge (no piers in creek) over salmon creek

Analysis of existing railcar bridge over creek for firetruck and excavator loading prior to subdivision development.

New access road with 34' wide x 10' long precast concrete slab band bridge needed over GVRD forcemain in Pitt Meadows Airport.

In-house design and drafting of 12m span concrete slab access bridges to commercial development in Port Coquitlam

Project manager and chief bridge engineer for replacement design bridges (50m) for Nanaimo St. and Lakewood Dr. in Vancouver

Bridge design engineer responsible for rehabilitation of over 75 bridges in Hanoi City, Vietnam

Design of pedestrian culvert underpass for Pitt Meadows Airport 2000

Inspection services and engineering review for 1997 Pitt Meadows Capital Works program; new paving, road widening and waterline installation projects

Inspection services to investigate pile driving effects for subdivision. Pitt Meadows

Crack investigation and remedial repair for Hemlock Valley Dam and ski lift foundations

Design engineer for seven Sign companies- designing, reviewing and retrofitting sign structures. Tallest sign structure has been over 22m high.

Structural review and foundation design for various outdoor sculptures.

Structural review of new steel "bio-bed" tank. St. Regis Sewage Treatment Plant, Ontario

Structural design of GVRD water pollution tank, Abbotsford

Expo '86 Foreshore Structure, Vancouver, B. C. (1985 - 1986) Design of foreshore structure for Expo '86 to support pavilion and truck loading, including timber piles (severe soil conditions), pile load-testing, piers and concrete box stringers.

Expo '86 Structures, Vancouver, B. C. (1985) Project engineer for design of special 13m radius, triangular-truss steel hoop structures for Expo '86 Corporation, preparation of specifications, shop inspection and site inspection.

Canada Harbour Place, Vancouver, B. C. (1984) Structural design of cable-supported fabric roof for Expo '86 Canadian pavilion and present Vancouver Convention Centre (cables, anchorages and Weldment design.)

Canada Place Cruiseship Gangway, Vancouver, B. C. (1989) Project engineer for redesign of cruiseship walkway/gangway structure (steel truss) at Canada Harbour Place cruiseship facility in Vancouver to replace a previous structure.

Waterfront Floating Breakwater, Portland, Oregon (1984) Detailed flotation design for reinforced concrete hollow-core breakwater at Portland for Bellingham Marine Industries.

Citrus Bowl Stadium Expansion, Orlando, Florida (1988) Structural design review of upper-deck expansion of 60,000 seat Citrus Bowl Stadium in Florida, using precast concrete columns, girder and seating units (with longitudinal post-tensioning) on new spread footings.

Swine-Rearing Facility, Abbotsford, B. C. (1993) Detailed structural design of new 20,000 sq. m. hog-rearing structure for Taiwanese client in the Fraser Valley. Timber frame structure with precast and cast-in-place concrete substructure. Roof structure consists of over 1000 prefabricated timber mono-trusses.

Concord Pacific Seawall Structures, Vancouver, B.C. (1993) Project Engineer detail design and design review of piled deck/retained-earth structures for Concord Pacific Developments Ltd., in False Creek area.

Barge-Loading Facility, Port Alice, B.C. (1993) Project engineer for condition survey, analysis and retrofit for existing steel space-truss barge loading structure for Imasco Minerals.

Alcan Conveyor Galleries, Kitimat, B.C. (1993) Design engineer for design of new conveyor galleries (2 steel box trusses 75m long) for Alcan in Kitimat. Duties included complete design, retrofit of existing penthouses and design capacity review of existing structures. Design scheme was selected for cost effectiveness and ease of construction to suit critical project shutdown schedule.

Eburne Sawmill Inspection, Vancouver, B.C. (1989) Detailed structural inspection of timber-frame sawmill structure built in early 1900's. Duties included site inspection, review of all available structure information, structure evaluation, and final report to client.